LSDA PD9200 Series Exit Device

 

 

The PD9200 Series are heavy-duty exit devices for the most demanding doors. Available as Rim Panic-Rated (PD9200R), Surface Vertical Rod Panic-Rated (PD9200V), Rim Fire-Rated (PDF9200R), and Surface Vertical Rod Fire-Rated (PDF9200V). These devices are recommended for use on exterior and interior out-swinging doors.

Compliance

• PD9200
  • ANSI/BHMA A156.3 2014 Grade 1
  • UL listed Panic Hardware
• PDF9200
  • ANSI/BHMA A156.3 2014 Grade 1
  • UL10C fire-rated exit hardware, UL305 and UBC7-2, 3-Hour
• Latch
  • Rim: Deadlocking latch, stainless steel 3/4” throw
  • Vertical Rod: Top latch is stainless steel 5/8” throw, deadlocking pullman type; Bottom latch is panic-rated stainless steel 5/8” throw, deadlocking pullman type. Fire-rated version has round slide bolt). Easy latch adjustment for vertical rods.
• Device Lengths, Rim
  • 36” (327/8” actual length; can be cut back to 26” from head cover to end cap)
  • 48” (4451/64” actual length; can be cut back to 33” from head cover to end cap)
• Device Lengths, Rim Fire Rated
  • 36” (32-7/8” actual length; can be cut back to 24” from head cover to end cap)
  • 48” (44-51/64” actual length; can be cut back to 30” from head cover to end cap)
• Handing: Non-Handed
• Material Stainless Steel, Brass, Extruded Aluminum
• Strike
  • For Rim, surface applied (double door strike available)
  • For Vertical Rod Strikes, surface applied top, mortise required for bottom strike
• Door Types Commercial wood and hollow metal
• Door Prep
  • Surface application, plus trim prep
  • Door height for Vertical Rod is standard 7’0” with optional top rod set for 8’0” and extensions available for up to 10’0”
  • Top and bottom rods have vertical adjustors in the center case.
• Dogging
  • Standard dogging by key provided or 5/32 hex wrench
  • Cylinder dogging option available (Requires a 1-1/4” Mortise Cylinder with Cloverleaf Cam)
  • Fire-Rated Devices cannot be dogged Door Thickness 1-3/4” - 2-1/4”
• Stile Width Minimum 2-7/8”
• Projection
  • Pushbar Neutral: 3-13/16”
  • Pushbar Depressed: 3-1/16”
• Keying Outside trims use conventional mortise or rim cylinders (not included)

 

Do you have a question, or need a quote? Contact your local IDN Branch or plalce an order through our website for the LSDA PD9200

© Copyright IDN Global, Inc. All Rights Reserved