The PD9200 Series are heavy-duty exit devices for the most demanding doors. Available as Rim Panic-Rated (PD9200R), Surface Vertical Rod Panic-Rated (PD9200V), Rim Fire-Rated (PDF9200R), and Surface Vertical Rod Fire-Rated (PDF9200V). These devices are recommended for use on exterior and interior out-swinging doors.
Compliance
- PD9200
- ANSI/BHMA A156.3 2014 Grade 1
- UL listed Panic Hardware
- PDF9200
- ANSI/BHMA A156.3 2014 Grade 1
- UL10C fire-rated exit hardware, UL305 and UBC7-2, 3-Hour
- Latch
- Rim: Deadlocking latch, stainless steel 3/4” throw
- Vertical Rod: Top latch is stainless steel 5/8” throw, deadlocking pullman type; Bottom latch is panic-rated stainless steel 5/8” throw, deadlocking pullman type. Fire-rated version has round slide bolt). Easy latch adjustment for vertical rods.
- Device Lengths, Rim
- 36” (327/8” actual length; can be cut back to 26” from head cover to end cap)
- 48” (4451/64” actual length; can be cut back to 33” from head cover to end cap)
- Device Lengths, Rim Fire Rated
- 36” (32-7/8” actual length; can be cut back to 24” from head cover to end cap)
- 48” (44-51/64” actual length; can be cut back to 30” from head cover to end cap)
- Handing: Non-Handed
- Material Stainless Steel, Brass, Extruded Aluminum
- Strike
- For Rim, surface applied (double door strike available)
- For Vertical Rod Strikes, surface applied top, mortise required for bottom strike
- Door Types Commercial wood and hollow metal
- Door Prep
- Surface application, plus trim prep
- Door height for Vertical Rod is standard 7’0” with optional top rod set for 8’0” and extensions available for up to 10’0”
- Top and bottom rods have vertical adjustors in the center case.
- Dogging
- Standard dogging by key provided or 5/32 hex wrench
- Cylinder dogging option available (Requires a 1-1/4” Mortise Cylinder with Cloverleaf Cam)
- Fire-Rated Devices cannot be dogged Door Thickness 1-3/4” - 2-1/4”
- Stile Width Minimum 2-7/8”
- Projection
- Pushbar Neutral: 3-13/16”
- Pushbar Depressed: 3-1/16”
- Keying Outside trims use conventional mortise or rim cylinders (not included)
Do you have a question, or need a quote? Contact your local IDN Branch or plalce an order through our website for the LSDA PD9200
© Copyright IDN Global, Inc. All Rights Reserved